Tags > Mercedes-Benz

MAXI - BGA + 204/207

MAXI - BGA + 204/207
new!

Category: BGA solution

MB prog MAXI is an evolution with a special add-on of BGA/204/207 software, set  of software and hardware that covers entire set of Mercedes keys programming. When we were designing MAXI kit set, we had in mind that when it comes to key programming, this set should cover not only new IR keys, but also transponder keys and first generation of IR keys (flip keys).

MAXI kit contains not only key programming tools but also tools that allow erasing of the modules in Mercedes-Benz cars (including ECU’s and gearbox) and also testing on the bench. MAXI kit contains also emulators and one key, ready to be used.

What is the most important add-on is a function that allows in an easy way, to read password and program keys in vehicles with BGA keys

€ 3,035.00
€ 3,035.00
EVO 4 - BGA + 204/207

EVO 4 - BGA + 204/207
new!

Category: BGA solution

EVO 4 Kit - evolution of MBE Evo 4 locksmith, kit that offers big flexibility and possibilities for its users. This kit contains newest generation of software in key programming for Mercedes Benz but it also allows to work with ELV (Electronic Steering Locks) and other components in Mercedes Benz vehicles (erasing of gearboxes, ECU's etc). This kit was designed for more advanced users that are not afraid of their work with EEPROM's and soldering. It not only allows to work with new BGA keys but also with older generation of Mercedes Benz vehicles. 

What is the most important add-on is a function that allows in an easy way, to read password and program keys in vehicles with BGA keys

€ 2,499.00
€ 2,499.00
Starter - BGA + 204/207

Starter - BGA + 204/207
new!

Category: BGA solution

Starter Kit - newly designed kit that offers big flexibility and possibilities for its users. This kit contains newest generation of software in key programming for Mercedes Benz but it also allows to work with ELV (Electronic Steering Locks) and other components in Mercedes Benz vehicles (erasing of gearboxes, ECU's etc). This kit was designed for those that just do want to start working with Mercedes Benz vehicles and do not want to use any soldering. All features are available with use of simple connectors. 

What is the most important add-on is a function that allows in an easy way, to read password and program keys in vehicles with BGA keys

€ 1,599.00
€ 1,599.00
Click'n Go set

Click'n Go set
new!

Category: Click'n Go

Full set of specially designed adapters, allowing to read Mercedes-Benz EIS'es (electronic ignition switches) without any need of soldering or tempering with them.

€ 1,349.00
€ 1,199.00
€ 1,199.00
€ 1,349.00
UPDATE I - BGA Solution

UPDATE I - BGA Solution
new!

Category: BGA solution

Software and hardware allows read password and program keys in vehicles with BGA keys

Update I - any customer that already has a Magic Eraser and MB Key Prog 2 Evo

€ 799.00
€ 799.00
UPDATE II - BGA Solution

UPDATE II - BGA Solution
new!

Category: BGA solution

Software and hardware allows read password and program keys in vehicles with BGA keys

Update II - any customer that already has an MB Key Prog 2 Evo and does not have Magic Eraser

€ 999.00
€ 999.00
UPDATE III - BGA Solution

UPDATE III - BGA Solution
new!

Category: BGA solution

Software and hardware allows read password and program keys in vehicles with BGA keys

Update III - any customer that already has a Magic Eraser and does not have MB Key Prog 2 Evo

€ 1,199.00
€ 1,199.00
204/207 click'n go

204/207 click'n go
new!

Category: BGA solution

204/207 click'n go adapter; the fastest way to safely read information out of W204/C207 Mercedes-Benz passenger vehicles. It protects data stored inside of the EIS/EZS as you do not need to make any soldering or mechanical changes in EIS. It protects also EIS/EZS against CAN driver overheating, as it is usually happening when you try to read EIS/EZS through CAN/OBDII.

€ 134.99
€ 79.00
€ 79.00
€ 134.99
MBKEY generator

MBKEY generator
new!

Category: Key programming

NEW MBKEY generator by MBE Engineering works with SKC software. Device calculate keys in 10 min after EIS dump is uploaded

€ 90.00
€ 90.00
NEC KEY PROGRAMMER V. 12

NEC KEY PROGRAMMER V. 12

With the use of the software and hardware of NEC KEY PROGRAMMER V.12 one can program keys in Mercedes Benz cars starting 2001 till 2010/2011 (see models below). Once again, as a world leader in keys programming in Mercedes-Benz cars we had designed and released set that allows to:

- Read information from the car without the need to remove anything

- Can work in offline mode (no internet connection needed)

- Calculate keys in a very fast way

- One can program keys through the IR ports

€ 525.00
€ 525.00
NEC KEY PROGRAMMER V. 12 WITHOUT THE CASE

NEC KEY PROGRAMMER V. 12 WITHOUT THE CASE
new!

With the use of the software and hardware of NEC KEY PROGRAMMER V.12 one can program keys in Mercedes Benz cars starting 2001 till 2010/2011 (see models below). Once again, as a world leader in keys programming in Mercedes-Benz cars we had designed and released set that allows to:

- Read information from the car without the need to remove anything

- Can work in offline mode (no internet connection needed)

- Calculate keys in a very fast way

- One can program keys through the IR ports

€ 499.00
€ 499.00
MB KEYPROG2 FULL + ONLINE

MB KEYPROG2 FULL + ONLINE

Set of hardware and software allowing to program IR keys in Mercedes-Benz cars (cars equipped with ignition lock/EZS with Motorola processor, manufactured between 1997-2008). This tool allows also to program keys through IR port (with an payable update) and with one can  use NEC PCB to read/erase/write NEC processors (processors being used in IR Mercedes-Benz keys).

There’s possible communication through K-line with steering locks and ignition locks (models like 202, 210 and other), it allows also to program NEC processors.

€ 399.00
€ 399.00
MB NEC_KEY + ONLINE

MB NEC_KEY + ONLINE

Just read EZS dump file off the ignition, load it into our web server and after few moments you will receive files to program new keys with our  NEC programmer.

€ 299.00
€ 299.00
NEC KEY PROGRAMMER V.10.60 - Hardware + Software Basic

NEC KEY PROGRAMMER V.10.60 - Hardware + Software Basic

NEC v.10.60 is a basic, start package for Mercedes-Benz key programming. Although it’s just a first step in Mercedes-Benz programming it has huge possibilities and allows to not only read/ erase/ program keys in cars but also do basic diagnostics on keys (like with the use of MB Key Expert). With the use of NEC PCB (included in the set) one can easily read/erase/write NEC processors used in Mercedes keys.  If you work with older generation of keys, you can use MBE EEPROM programmer, to read/rease/write information in Motorola processors.

You can easily upgrade your tool with extra features, simply choose one in related products and you can do even more.

€ 249.00
€ 249.00
IR TOOLS

IR TOOLS

This package of hardware and software allows to read basic information stored in Mercedes-Benz ignition locks (EIS/EZS). You can read SSID of ignition lock, HASH codes of keys and status of the keys (with use of colors).

€ 179.00
€ 179.00