Set of ECU connectors to be used with Breakbox v2, or third part tools.
This cable allows you to connect MAGPro2 tools to VAG DSG DQ200 controllers and can be used to read out the original file straight from the DSG connector as reading over OBD is not possible. It can be used to read/write all versions of DQ200 on the bench. The cable has both K-line and CAN wiring and is fitted with an OBD2 female plug allowing connection with an OBD2 cable (code MAGP0.2.4).
This cable allows you to connect MAGPro2 tools to VAG DSG DQ250 controllers. This can be used to read out the original file straight from the DSG connector as reading over OBD in Tricore versions of DQ250 is not possible (type Exx and Fxx). It can also be used to read/write all versions of DQ250 on the bench (type Cxx, Exx and Fxx). The cable has both K-line and CAN wiring and is fitted with an OBD2 female plug allowing connection with an OBD2 cable (code MAGP0.2.4).
This cable allows you to connect MAGPro2 tools to VAG DSG DQ500 controllers and can be used to read out the original file straight from the DSG connector as reading over OBD is not possible. It can be used to read/write all versions of DQ500 on the bench. The cable has both K-line and CAN wiring and is fitted with an OBD2 female plug allowing connection with an OBD2 cable (code MAGP0.2.4).
Universal coloured cablage for connection with TC Bootloader ECUs. Purchasable only for owners of X FLASHER for BMW F Series.
Compatible with X FLASHER for BMW F Series (MAGP50.1)
Universal cablage, compatible with TCU Manager and X17 tools. Can connect to any TCU.
To use Breakbox v2 with third party chiptuning/diagnostic tools.
Cable to connect a FGTech interface to a Breakbox v2
To connect the Breakbox to OPEL Bosch EDC17C19, MED17 ECUs.
To connect the Breakbox v2 to FIAT Bosch MED17.3.1 ECU
ECU connector for VAG Simos 8.3x and Simos 8.4. To connect the Breakbox v2 (MAGP1.20) to VAG Simos 8.3x and Simos 8.4 ECUs.