Regular price €1.200,00

You can order this license by e-mail: support@mbkeyprog.com

TANGO programmer  V1.108 - new generation of transponder programmer.

From currently version following key makers are for free:

AD 100 Out-IN 8 digits Free for all 
BMW CAS remoteles Free for all 
BMW CAS remote Free for all
BMW CAS unlock Free for all 
BMW bikes (HITAG2) Free for all 
DAF maker Free for all 
Kessy Free for all 
EZS (Megamos 8E) Free for all 
VW Key maker Free for all


Tango programmer is a new generation of transponder programmer which is developed to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies. 
New function for reading the Kilometers, VIN and transponder type for all BMW keys was added to the BMW software module! Immo pin code is also displayede for some car models. With this programmer you can generate images for many different original transponders like Philips ID33, Philips Crypto for different ID's and Texas crypto!
!!!!!! VERY IMPORTANT !!!!!!
After generating a new transponder with TANGO Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly, even on new FIAT CODE 2 system, also used in PSA Group vehicles! Only you have to write the new file back into the immobilizer system!
NEW!!!!! * Free single TP22, TP23, TP24, TP25 transponder production everyday!!!!!NEW

     * Free write Component Security 7 bytes Tool (Megamos ID48) 

     759 Key Makers, 530 included with basic software 

     * Searching of the 7th byte by existing car's key(Megamos48)

     * Megamos8E Eeprom Access, Searching 7th Byte via existing key (VAG), Unlock Kia HITAG 2008-, Unlock Hyundai HITAG 2008- 


TANGO programmer - price list

TANGO Key Makers - 759 in total

The device is intended for programming of transponders, that are a part of automobile immobilizing systems.

Unlike the previous model the Gambit, new model Tango is the two-band device that has allowed to add the list supported transponders with firm Texas Instruments products (Tiris ©).

The list of supported for the present moment transponders.

Philips transponders: 
PCF7930-31 writing, reading 
PCF7935 writing, reading, shadow memory, crypto calculator
PCF7936 writing, reading, modes password, crypto, Manchester & Biphase encodings
PCF7941 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7942 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7943 transponder, remote, Manchester & Biphase encodings
PCF7944 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7945 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7945AC (VAG 2010-) IDE, eeprom reading
PCF7946 transponder, remote, Manchester & Biphase encodings
PCF7947 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7952 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7953 IDE, eeprom reading
PCF7961 transponder, remote, Manchester & Biphase encodings
*Auto switching between PCF7936 … PCF7961 windows if invalid type detected.
*Autodetect manchester / biphase

Temic transponders:
Temic 11 reading , writing to T5, TK5551
Temic 12 reading , writing to T5, TK5551 
Temic 8C reading

Megamos transponders:
Megamos (13) reading , writing to T5 , emulating on PCF7930-35
Megamos (48) reading, writing, PIN, unlock by PIN, 
full range of memory contents, crypto calculation
Megamos CRYPTO-2 (8E) read ID, read/write EEPROM, write Cryptokey

Texas transponders:
Tiris (4C) reading
Tiris (4D) DST crypto reading, writing, crypto calculator
Tiris (4E) DST crypto reading, writing, crypto calculator
Tiris (DST+) reading

TK5551M (T5 replacement)

SAAB reading , writing to T5

The product is in working out stages, therefore the list of the supported transponders will be developed later.

For the present moment Tango has the following built in makers and functions

The device has ergonomic design with high mechanical characteristics of  IP65 class according to the DIN EN 60529 standard. The device has following dimensions:

length   160 mm 
width    80 mm 
height   50 / 30 mm

The device enclosure is made of  3mm ABS-plastics with a rubber shock-proof damping seal which simultaneously is a decor element. The seal also prevents the device sliding on a work table surface.

Also as well as the Gambit, the device derives the power from USB and does not demand connection of an external power source. Difference is use of drivers of other type that allows to avoid conflicts to other devices working through virtual ports.

Unlike the Gambit, the device has wide slot for keys of any size and two small holes of various depth for transponders of any sizes.

LED indication unlike Gambit is taken out on the upper cover of the case that is solution more convenient in using.

The program interface has the modern intuitive design favorably differing from the interface of Gambit.

Meeting modern requirements, Tango supports OS Vista that was not  realized in Gambit. Supported versions of Windows:

Win 98
Win 7




We often restock popular items or they may be returned by the other customers. If you would like to be notified when this happens just enter your details below.

Please select variant
Please enter name
Invalid email address
Required mobile number Invalid number Invalid country code Too short Too long ✓ Valid
Your notification has been registered. Close
Looks like you already have notifications active for this size!

We respect your privacy and don't share your email with anybody.


Thank you, we have now received and recorded your request to be notified should TANGO PROGRAMMER be restocked.

We will only use your email for this purpose.

We have cancelled your request.